Skip to content

CAPABILITIES

INFRASTRUCTURE & TESTING

G CENTRIFUGE

G CENTRIFUGE

Centrifuge facility designed for acceleration and structural strength testing, measuring pilot and equipment endurance under high G force.

  • High-G Simulation
  • Acceleration Testing
  • Structural Strength Evaluation
  • Performance Verification
  • Reliability Testing
  • Lung Simulation
  • RS-485 Communication Capability
  • Pressure and Flow Data Acquisition
  • 12.8 G/s Acceleration Rate
  • Maximum 30 G Force
  • Adjustable G Force for the Desired Duration
  • 22 kV Motor Power Supply
  • 150 kg Test Load Capacity
  • 13.5 G/s Initial Acceleration Rate
  • 30 L/s – 10 bar Dry Air Supply
  • Dual Gigabit Ethernet for Data Transfer
  • 6 × 10-amp Power Source
  • 6 Discrete Signal Outputs
PRESSURISATION CHAMBER

PRESSURISATION CHAMBER

Pressurisation facility simulating real flight conditions with dual-chamber technology, for altitude and decompression testing.

  • Temperature Testing from -70 °C to +80 °C
  • 80,000 ft Altitude Simulation
  • Explosive Decompression (ED) Testing
  • Rapid Decompression (RD) Testing
  • Overpressure Testing
  • Dual-Chamber Technology
  • Synchronized Chamber Operation
  • Real Flight Condition Simulation
  • Environmental Durability Testing
  • 50,000 ft/min Climb Rate
  • 100,000 ft/min Dive Rate
  • 3 °C/sec Temperature Change Rate
OXYGEN CLEANING FACILITY

OXYGEN CLEANING FACILITY

Controlled cleanroom facility where aerospace components exposed to high-purity oxygen are cleaned in compliance with international standards.

  • Oil and Particulate Removal
  • High-Purity Cleaning
  • Cleaning of Aerospace Components Exposed to High-Purity Oxygen in Compliance with MIL-STD-1330E and SAE ARP1176B Standards
  • ISO Class 6 (Class B) Cleanroom with a Controlled Environment
  • Entrance 1 — ISO Class 8: 4.18 m²
  • Entrance 2 — ISO Class 7: 2.86 m²
  • Entrance 3 — 3.70 m²
  • Pass Box: 0.36 m² (for material transfer in and out)
  • 24.39 m² Total Cleanroom Area
  • ISO 6 Clean Room: 13.65 m²
  • 49 kW Air Conditioning Unit
  • ISO 5 Laminar Flow Cabinet — 1 kW, with ULPA Filters
  • Quality Verification with Bresser Analyth LCD Microscope

Would you like to have a test performed on this infrastructure?

Send your request with the sample, the standard and the number of items; the laboratory manager will get back to you.

TEST REQUEST